ColdTech CFD-2F User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
ELECTRICAL REQUIREMENTS
This commercial appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be
plugged into an electrical outlet that is properly installed, sized and grounded with appropriate overcurrant protection.
Consult a qualified electrician if the grounding instructions are not completely understood or if doubt exists as to whether
the appliance is properly grounded.
• For more information refer to the electrical requirements on the nameplate.
• Voltage must be 115 volts /20 amp circuit on all models.
Reach in Commercial Refrigerators Model Amperage:
o Solid One Door CRR229-1: 7.4 amps
o Solid Two Door CRR466-2: 9.4 amps
o Solid Three Door CRR720-3: 10.4 amps
Reach in Commercial Freezer Model Amperage:
o Solid One Door CRF229-1: 8.3 amps
o Solid Two Door CRF466-2: 9.9 amps
o Solid Three Door CRF720-3: 14.0 amps
• Designate one outlet for this appliance to minimize shock and/or fire hazards and to ensure the outlet is not
overloaded.
• Please ensure the required voltage of the compressor is being supplied at all times. Low or high voltage can
detrimentally affect the refrigeration unit.
• Do not use extension cords.
• Do not splice, alter or tamper with the power cord that is equipped with the appliance.
• Keep power cord away from heated surfaces.
• Unplug the unit during maintenance and cleaning. Ensure your hands are dry and free from debris.
After unplugging the unit, wait 10 minutes before re-plugging it back in. Failure to do so could damage the
compressor.
• When moving the refrigerator or freezer please ensure proper health and safety regulations are practiced and do
not put hands under the unit.
• If you are not using the refrigerator or freezer for extended periods, please unplug the unit.
• Do not store any flammable or explosive gas or liquids inside the unit.
• Do not attempt to remove or repair any component unless instructed by ColdTech Commercial.
Call us at 1-855-241-3251 before starting.
• Make sure the unit is not resting on or against the electrical cord and plug.
• Do not immerse power cord, plug or the appliance in water.
• Do not hang on the doors.
• Before loading items into the appliance ensure it has reached the desired temperature and make sure all of the
accessories are installed (shelves, shelf clips, casters, etc.).
IMPORTANT SAFETY INFORMATION
3
SAFETY PRECAUTIONS
WARNING
Improper use of the grounding plug can result in a risk of electric shock.
Page view 3
1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments